Finnos

SAWLINE

Sawing patterns come true

On the sawline, Rotation Control makes sure the log turns to the optimised angle, and Setup Control measures the sawn timber right after sawing. Edging and grading are handled by the Longitudinal Wane Scanner and the Longitudinal Board Scanner.

THE SAWLINE MAKES SURE THE SAWING PATTERN COMES TRUE

An optimised sawing pattern only pays off if it is actually realised. The sawline measuring devices monitor rotation and the dimensions of every piece, and their data connects with the other Finnos scanners.

ROTATION CONTROL

Rotation Control monitors log rotation on the sawline just before sawing. Machine vision follows the log surface throughout the rotation and measures how much the log actually turned, so the rotator can be monitored and corrected.
Benefitapprox. €280,000–700,000 per year (example sawmill 300,000 m³).
Connectionsrotation data connects with the other Finnos scanners.
Agent's rolemonitors the rotator and raises an alarm about wear before it costs money.
Rotation Control monitors log rotation on the sawline with machine vision

Features

  • The angle is measured for every log, so the rotator's real accuracy is visible directly from production.
  • Value yield improves by 1–2.5%, because poor sawing angles are often right next to the best ones and even a small error costs money.
  • An optimised rotation angle only pays off if the log actually turns to it. An error of just 6° can halve the benefit of optimisation.
  • Continuous measurement reveals wear and the need for adjustment in time. Rotation data can be combined with the other Finnos scanners.
  • Commissioning example: Rotation Control revealed a systematic, asymmetric 20-degree rotation error that recurred in every other log.

SETUP CONTROL

Setup Control measures the width and thickness of the sawn timber right after sawing, directly on the sawline. The measurement covers the entire production, and the operator sees the results in real time.
Benefitapprox. €230,000–690,000 per year (example sawmill 300,000 m³).
Connectionsmeasurement data for feedback control and material tracking.
Agent's rolemonitors dimensions and raises an alarm when the sawing pattern or blade needs adjustment.
Setup Control measures the width and thickness of sawn timber on the sawline

Features

  • After a sawing pattern or blade change, the dimensions are visible from the very first pieces.
  • Dimensions stay on target, so oversawing and undersawing decrease. The conversion ratio improves by 1–3%.
  • The measurement data can be used for feedback control and material tracking.
  • Features under development include detecting visual defects with cameras, which makes it possible to avoid knots with skewed edging.

LONGITUDINAL WANE SCANNER

The Longitudinal Wane Scanner is a lightweight edging scanner installed on a longitudinal conveyor. It scans the side board with consecutive laser lines and controls edging. The board passes through the scanner lengthwise.
Benefitedging that gives the best value from every side board.
Connectionscontrols edging directly and mounts on existing structures.
Agent's rolemonitors the value of edging and adjusts the optimisation parameters.
Longitudinal Wane Scanner scans the side board with laser lines for edging

Features

  • Each laser line measures its own section of the board. When more lines are added, the board is measured over a shorter distance, so the scanner fits tight spaces.
  • The scanner can be equipped with 1–4 cameras depending on the space.
  • The optimisation selects the edging that gives the best value from the board.
  • The frame is mounted on existing structures.
  • The operator can enter the grade manually with the buttons on the control desk.

LONGITUDINAL BOARD SCANNER

The Longitudinal Board Scanner is a compact longitudinal board scanner with the same AI-based defect detection as the transverse Board Scanner. It is designed for grading, trimming and cross-cutting, and it is also suitable for planed and tongue-and-groove products.
Benefitgrading, trimming and cross-cutting with the same device, even in tight spaces.
Connectionsthe same AI-based defect detection as in the Board Scanner.
Agent's rolemonitors grading and trimming.
Longitudinal Board Scanner

Features

  • The compact design suits lines with little space.
  • Defect detection is the same as in the Board Scanner.
  • The same device handles grading, trimming and cross-cutting.
  • Suitable for planing mills for grading planed and tongue-and-groove products.

Other solutions

We also offer other solutions for the varying needs of sawmills

OUR SOLUTIONS REVOLUTIONISE YOUR CASH FLOW

Finnos scanner solutions guarantee better efficiency compared with conventional technology. They significantly improve productivity, raw material savings and quality yield. Tailored, easy-to-use solutions guarantee more value from every log.

Request more information about the product solution

We are happy to help with all your questions.
Send us your message and we will be in touch as soon as possible.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Make more
profit!

Let's map out together your opportunity for a significant improvement in productivity.

Finnos Oy

Tukkikatu 5
53900 Lappeenranta

[email protected]

2026 © Finnos Oy | All rights reserved | by developit // creative